Specialty contractor · Riyadh

We build the metalthat defines a building.

A Saudi specialty contractor for architectural metal works, building envelope, road safety and fit-out. One accountable contract, from shop drawing to handover.

Request a quote Explore our services

Engineered to ±0.5 mm.

One team accountable from shop drawing to handover.

Build Right is a Riyadh specialty trade contractor. We take architectural metal from the first sketch to the last bolt, engineered to specification and finished to the millimeter.

0
Specialty product lines
0
Architectural metals
0
Surface finishes
±0
Millimeter tolerance
0
Accountable team, drawing to handover

Specialty contractor

One contractor. Six connected services.

We contract, engineer, fabricate and install specialist packages for owners and main contractors, from small works to giga-project programs.

01

Specialty contracting

Specialist packages for architectural and building envelope scopes, contracted directly with owners and main contractors, with one party accountable from award to handover.
02

Architectural metal works

Design assist, fabrication and installation of structural and decorative metalwork: railings, screens, ceilings, cladding, stairs and bespoke pieces.
03

Building envelope

Aluminum cladding, rainscreens, perforated skins, louvers and the glazing interfaces around them, engineered for the heat, dust and wind loads of the Kingdom.
04

Road safety and infrastructure

Vehicle parapets and guardrails for bridges, bollards for access control, and gratings and railings for public infrastructure, with the technical approval chain handled for you.
05

Fit-out

High specification interior packages: feature ceilings, decorative stainless, partitions, shopfronts, doors and finishes coordinated with joinery and MEP.
06

Project management

Direct supervision and administration of every package: program control, scope management, submittals, subcontractor coordination, QA/QC and HSE, reported to you through one team.

All services and capacity

Our specialty

Products we make and install.

Eight product lines. Pick a line, then a product. Every page links to the next, so you can move through the whole range in a few taps.

C01Facades & CladdingRainscreen systems, aluminum composite and solid panels, perforated skins and feature cladding that give a building its outer face and protect it for decades.Line overview

Products in this line

Ventilated rainscreenOpen or closed joint panels on an aluminum subframe, with an air gap behind for heat and moisture control.›Composite and solid panelsACP with fire rated cores or solid aluminum sheet, folded into cassettes with concealed fixings.›Perforated and patterned skinsCustom perforation and laser cut patterns for shading, screening and signature facades.›Stainless and specialty metalsStainless steel, brass, copper and weathering steel cladding for feature walls, inside and out.›
C02Railings & BalustradesCable, glass infill, mesh and tube balustrade systems for ramps, balconies, stairs, terraces and atriums, detailed as one piece with their fixings.Line overview

Products in this line

Cable balustradesTensioned stainless cables between slim posts for open views.›Glass infillLaminated glass held by clamps, channels or point fixings.›Mesh and bar infillWelded mesh or vertical bars where child safety and climb resistance matter.›HandrailsRound, flat or LED lit handrails on posts or wall brackets.›
C03Screens & LouversDecorative, privacy and acoustic screens, functional louvers and equipment enclosures that control light, air and views.Line overview

Products in this line

Laser cut screensCustom patterns in aluminum, steel or Corten, flat or folded.›Fixed louversWeather louvers and architectural blades for ventilation and screening.›Louver doorsMatching doors with frames, hardware and locks.›EnclosuresScreened enclosures for generators, chillers and utility equipment.›
C04GratingsLinear, bar and architectural gratings for drainage channels, trench covers, walkways and facade edges, set flush with the finished floor.Line overview

Products in this line

Linear slot gratingsSlim stainless bars for a clean architectural line.›Bar gratingsWelded or pressed bar grating for walkways and platforms.›Trench and channel coversCovers with frames sized to your channel and load class.›Heel and wheelchair safeNarrow slot options for public areas.›
C05Metal CeilingsFeature and modular metal ceilings, soffits and canopies: baffle, linear, panel and faceted systems for lobbies, public spaces and building exteriors.Line overview

Products in this line

Baffle and linearVertical baffles or linear strips with integrated lighting lines.›Lay in and clip in panelsPlain or perforated panels with easy access to services.›Feature and facetedCustom geometries, backlit panels and sculpted forms.›Soffits and canopiesExterior systems designed for wind load and heat.›
C06Bridge Parapet GuardrailsSteel vehicle restraint parapets for bridges, viaducts and overpasses. Build Right is the approved KSA distributor for ROAD STEEL Gonvarri Industries.Line overview

Products in this line

Steel posts and railsHeavy steel posts and longitudinal rails, bolted to the bridge edge beam through anchored base plates.›Galvanized or color coatedHot dip galvanized, or finished in a coated color chosen for the project.›Walkways and screensCombined with pedestrian railings or tall mesh screens where the deck needs them.›End terminals and transitionsSloped end terminals and transitions that connect the parapet to the road barrier.›
C07BollardsFixed, removable, decorative and lit bollards in stainless and coated steel that protect people, storefronts and entrances while shaping how a site is used.Line overview

Products in this line

Fixed bollardsCast in or surface mounted stainless and steel bollards for permanent protection.›Removable bollardsSocketed bollards that lift out with a key when vehicle access is needed.›Decorative bollardsShaped tops, grooves, bands and custom profiles that match the architecture.›Lit bollardsBollards with LED rings or glowing tops that guide people after dark.›
C08Custom FabricationGates, canopies, cabinets and one of a kind pieces. If it can be drawn in metal, we can cut, form, weld and finish it.Line overview

Products in this line

Gates and doorsSwing and sliding gates, grilles and feature doors.›Canopies and shadeSteel and aluminum canopies, pergolas and shade frames.›Cabinets and special piecesCabinets, counters, frames and special pieces built to drawing.›
All products

Capacity

Built for projects of every size.

The same team, process and certified fabrication, whether the package is a single stair rail or an eighteen million riyal program.

Up to SAR 0.5M

Small works

Quick turnaround packages where precision and finish matter as much as on a tower.

  • Grab rails and ladders for a yacht club, Red Sea coastSAR 0.01M
  • Decorative stainless works for a luxury hotel, RiyadhSAR 0.04M
  • Handrails and gates in an urban park, RiyadhSAR 0.43M

SAR 0.5M to 5M

Medium packages

Multi trade metal packages with shop drawings, approvals and phased installation.

  • Metal and glass works, logistics area of a mountain destinationSAR 0.86M
  • Decorative stainless steel for a hotel in a financial district, RiyadhSAR 1.51M
  • Miscellaneous metal works for a schools program, RiyadhSAR 2.08M
  • Bollards for a major Riyadh developmentSAR 3.25M

SAR 5M and above

Large programs

Giga-project scale packages with long runs, strict programs and multiple approval authorities.

  • Metal works for an entertainment complex, MakkahSAR 5.65M
  • Aluminum perforated facade and glass for an industrial project, JazanSAR 7.65M
  • Stainless, steel, glass and decorative metal for an urban park, RiyadhSAR 14.17M
  • Guardrails and glass balustrades for a sports and leisure corridor, RiyadhSAR 18.50M

Examples are anonymized packages executed by our fabrication partner TBK Metal KSA. Values exclude VAT.

How we deliver

One accountable contract. One certified fabrication partner.

Build Right contracts directly with the client and carries full commercial and delivery accountability. TBK Metal KSA is engaged as our Nominated Specialist Subcontractor, bringing factory certified fabrication, engineering support and installation crews to the metal works, cladding and facade scope. You deal with one team and one contract, backed by proven production capacity.

Delivery model, QA/QC and HSE
Client or main contractor
One contract
Build Right Contracting CompanySaudi registered specialty contractor, Riyadh. Holds the prime contract, the client relationship and the outcome.
Nominated specialist subcontract
TBK Metal KSANominated Specialist Subcontractor. Architectural metal manufacturer established in 2009 with a dedicated Saudi operation and a certified Riyadh facility.
30+Years of founder leadership in architectural metal
6,000m² certified fabrication facility in Riyadh (partner)
3 ISO9001 · 14001 · 45001 management systems (partner)
157Partner staff registered in KSA
35Packages delivered or in progress by the partner in KSA and Qatar
SAR 57MPartner KSA order book in progress

Experience

A glimpse of our work.

Contracts held by Build Right, thirty years of founder experience, and the record of our fabrication partner. Names withheld.

ActiveRepresentative image

Tier 1 main contractor

Mixed use tower, Riyadh

Architectural metal works package

Subcontract negotiated and administered directly by Build Right, with fabrication and installation by TBK Metal KSA under our supervision.

ActiveRepresentative image

Tier 1 main contractor, municipal client

Urban bridge, Riyadh

Vehicle parapet guardrail systems

Parapet systems secured directly by Build Right, including the full technical approval chain under EN 1317 for ROAD STEEL systems, with installation under our supervision.

USD 9.4bnMetro program, 40 stations, where our founder led a self perform team
SAR 18.5MLargest partner package: guardrails and glass balustrades, Riyadh
2Countries with delivered packages: Saudi Arabia and Qatar
See the experience

Materials & finishes

The right metal,
finished right

We work across the full architectural palette and advise on the tradeoffs (corrosion, cost, patina and look) before a single sheet is cut.

Stainless

GRADE 304 / 316

Finishes
Laser cut pattern · detail
Brushed and mirror polished stainless finish samples
Finish samples · brushed & mirror

Approved distributor in KSA

Built for the bridges
that carry a nation.

Steel vehicle restraint parapets by ROAD STEEL Gonvarri Industries, Spain. Supplied and installed in Saudi Arabia by Build Right.

Learn moreGet a quote
Fadi Husseini, Founder and CEO of Build Right

About

Led by its founder.

Build Right is a specialty trade contractor for architectural metalwork, the building envelope and interior fitout, based in Riyadh.

The company is led by its founder and stays hands on. The same people who quote the work read the drawings, run the shop and stand behind the finished detail. We keep the team small and accountability clear, so quality and schedule stay in one set of hands from first sketch to final installation.

Fadi HusseiniFounder & CEO · Build Right Company

Start a project

Bring us
a drawing

Send an early sketch, a sample board or a finished detail. We'll come back with material options, a buildable approach and a price.

CompanyBldg 2323, Bqaiq St, Al Zahra Dist., Riyadh 12811
Call us Speak with our team during working hours. +966 53 273 9048+966 55 481 5080
Email Send your drawings, specifications and project details. Write to us WhatsApp Chat with our team directly. Photos and voice notes welcome. Start a chat

We reply within one business day.